Px200e 1995

[johnboy83]

Hi guys, firstly I will apologise for my lack of knowledge so sorry. Just wondering what recommendations would be out there for a bit more power without going to a 210 kit also any upgrades on rest of the beast before the wife realises what I’ve been spending haha cheers

[ironsloth]

Hi and welcome.

[citydaz]

try;
SIP road 3 exhaust
drill your air filter
bigger carb
cylinder / piston / rings / head clean up
oversize rebore

[garystephen]

Hi citydaz,

When you say drill your air filter why do you do this and if you do then do you need to then upgrade the jets in the carb?

Cheers

Gary

[citydaz]

I think theres a discussion and explanation on this in the Technical thread.

[ironsloth]

Try reading this:-
vespa.proboards.com/thread/7263/p200-engine-leave-strip

[adrian]

Hi and welcome to the forum 👋👋👋

[phattanglo]

Hi and welcome,
It depends how far you want to go with mods.
A straight barrel kit swap will give your scoot a boost with the above mentioned Sip exhaust.
Alternatively as you're not looking for a barrel kit you could look at o tuning your existing barrel and piston but a degree of mechanical knowledge would be needed I think.
I'd love to have a go at my own scoot but I'd probably make a hash of it.
To be fair if you've already got a Dremel and you fancy a go there are quite a few Youtube channels dedicated to o tuning.
If it doesn't give you the boost you're looking for you can still get a barrel kit and no harm done.
It's good to work on your engine for experience and Vespa engines are not scary at all.

[ironsloth]

3 easy steps to tuning your scoot:-

1: replace front mudguard with fibreglass (no rust)

2: use this:-


www.ebay.co.uk/itm/Lucas-Oil-Motorcycle-Octane-Booster-59ml/272572464178?hash=item3f7695bc32:g:enEAAOSwtfhYtZjC

3: put down that second bacon sarnie... 🤠😎

[scooterg]

Welcome
If you want a lot more power,,,buy a big bike
Or have a go on a 125 then appreciate the 200
And just cruise along,never in a hurry,scooters just look as they’re gliding along