Motovespa 150s

[pab]

Hello all ,
Just got another scooter again after an extended break!! I’ve got a Motovespa 150s (1965). It’s got a Malossi MHR 187 kit on it with a 30mm PHBH carb , sip CNC clutch and a CST Performance pipe , it’s pretty quick and the front drum brake is nowhere near good enough . Is there a disk break conversion using the same forks or will I have to fit PX forks to upgrade the front brake and shock ?
Cheers , Pab

[adrian]

The easiest option is pk125 forks, but they are getting harder to find , so cheapest option is px or lml disk forks around £200 for everything needed and get them modified. Job done 👍

[peteb]

I take it you have 10" wheels with seperate spring and damper, if so...

I have one of these on a 125 TS, you also need a new brake lever and master cylinder also by Crimaz, and you should upgrade the spring and damper, and while you are there you might as well replace the bearings etc..


www.sip-scootershop.com/en/product/disc-brake-crimaz-front_78744210?usrc=Crimaz%20disc%20brake

It is an expensive option but you keep the original look...