PX pilot mixture screw adjustment .

[mo2470]

Hi All,
   What ideas has anyone come with to get at the pilot mixture screw.
On a PX200 with electric start.

[soulboy74]

7mm is the nut size on mine and you have to make a tool to fit that bugger !! Or cut a slot for a long handle screwdriver to fit it !! Slowly slowly slowly does it 🤞 best regards soulboy74

[gpowell]

3 options :
1. Use a socket on a driver handle (may need extension depending on driver length) to adjust it.
2. Convert the long hex screw by slotting the head to use a screwdriver.
3. buy a ready done one slotted screw type

www.vespajets.com/product/vespa-mixture-screw-si-dellorto-spaco-for-px125-200e-lusso-98-my-cosa/

[mo2470]

Thanks for the replies


Mo..... 

[alan34]

Hello there. I found a piece of flat bar the stuff you used to fit radios then cut a 7mill opening in one end then bent it round and there you go I glued another piece on to make it a bit longer then you can reach round to adjust screw. Cheers alan.

[mo2470]

Oct 8, 2023 21:10:12 GMT gpowell said:

3 options :
1. Use a socket on a driver handle (may need extension depending on driver length) to adjust it.
2. Convert the long hex screw by slotting the head to use a screwdriver.
3. buy a ready done one slotted screw type

www.vespajets.com/product/vespa-mixture-screw-si-dellorto-spaco-for-px125-200e-lusso-98-my-cosa/

Vespajets mixture screw works a treat  ( happy days )


Mo........