|
|
Post by soulboy74 on May 24, 2023 17:16:34 GMT
Now do any front brake pads for PX fit right on the Euro 3 vespa or do you have to get just the right type to fit and work properly !! I have replaced mine with the Mossi brand and are not to sure if they are right !! And advice most welcome ✊
|
|
|
|
Post by adrian on May 24, 2023 20:36:47 GMT
Do they look the same as the ones you changed ?
|
|
|
|
Post by alan34 on May 25, 2023 7:30:24 GMT
Hello there. Try measuring old ones with new.i think caliper and disc are the same on late px.ccheers alan.
|
|
|
|
Post by soulboy74 on May 25, 2023 13:49:05 GMT
Well I have been trying to figure out what is what with the latest PX difference ! and it looks like yet another difference 2011+ are different from all over PX pads they are just a bit bigger than the rest finely got some order in post ! Let's hope it sorts out the problems l have been having !! Okay l am going to get a upgraded one! Witch is the best plug in and play type wear l don't have to change nothing alse but the caliper?? My pedparts are saying tong tang type ?? As anyone else heard of such caliper? And do they work properly ? Will the sip caliper plug in and play ? Best regards soulboy74
|
|
|
|
Post by adrian on May 25, 2023 15:12:32 GMT
The sip caliper is plug and play. I have one on my scooter and works a treat
|
|
|
|
Post by ironsloth on May 25, 2023 16:54:07 GMT
Tong tang?? Sounds like it’s made from camel sh*te…. Stick with Sip or standard, and just uprate your pads if you really need to. I’ve got some EBC (think it’s the carbon series??) waiting to go in the front, and either Ferodo or EBC for the rear, I know a bloke who knows a bloke at the factory… 😶🌫️🤓
|
|
|
|
Post by phattanglo on May 26, 2023 6:21:19 GMT
Heng tong is the manufacturer for the 2011-2016 calipers, the pads are slightly bigger than on the older calipers.
Wasp performance have the pads I think
|
|
|
|
Post by ironsloth on May 26, 2023 8:50:30 GMT
Bloody hell, heng tong is just as bad…. 😶🌫️
|
|
|
|
Post by soulboy74 on May 26, 2023 12:50:13 GMT
Done done bloody done right pads arrived this morning and been busy sorting out the front brake caliper and pads fit a treat 👍yes you need different ones for our 2011+ PX or you end up with one's that are a bit too loose and upset the hole caliper so fingers crossed all's well still looking into a upgraded sip one just have to save up the penny's okay off for a spin to start beding them in just wish they would tell you this online sit PX pads are different !! Best foot forward soulboy74 🏴
|
|
|
|
Post by soulboy74 on May 28, 2023 13:17:36 GMT
Update on the braking system issues Right the problems was not with the caliper ! But the master cylinder piston and leaver pushing the piston in under pressure at rest !! Now I read somewhere that someone alse where having problems too and read on what you have to do is file off about 1/8 of a inc till the piston is not under two much pressure at rest 👍 thanks you Gus's who ever it was saved me a packet best regards soulboy74 🏴
|
|
|
|
Post by adrian on May 28, 2023 13:58:22 GMT
Glad I could help 🤪 after this happen to me and brake locked on after about a mile, had to file it back in the station carpark 😥 luckily my gerber had a file on it
|
|
