shepys
1st Class Ticket
Posts: 91
|
Post by shepys on Feb 11, 2023 14:47:52 GMT
Hi I’ve just finished rebuilding a P200e engine but I had problems with the gears till I found out I have the wrong selector rod in. I can split the engine but I keep thinking can I replace it without spitting the engine. The cruciform should stay in place so I can’t see why I can’t do it without splitting the engine. What you think guys
|
|
|
|
Post by scooterbooter on Feb 11, 2023 15:45:35 GMT
Should be fine.never tried. Counter clock wise for that little devil.x
|
|
|
|
Post by scooterbooter on Feb 11, 2023 15:46:38 GMT
And a spot o glue but you already know that dont cha tiger.
|
|
|
|
Post by scooterbooter on Feb 11, 2023 15:48:16 GMT
Only worry would be cross threading. Go easy these parts do cross thread easily.
|
|
|
|
Post by scooterbooter on Feb 11, 2023 15:48:32 GMT
I'll stop now
|
|
|
|
Post by scooterbooter on Feb 11, 2023 15:51:49 GMT
Maybe do it in 4th. Making sure it will not slide into 3rd ? Thats it now Last one.
|
|
|
|
Post by scooterbooter on Feb 11, 2023 15:53:14 GMT
I suppose your in 4th anyway to remove the box...
|
|
|
|
Post by scooterbooter on Feb 11, 2023 15:53:46 GMT
And that's that.
|
|
|
|
Post by gpowell on Feb 14, 2023 22:43:07 GMT
Early boxes have a washer/spacer between rod and cruciform, have you fitted it?
|
|
shepys
1st Class Ticket
Posts: 91
|
Post by shepys on Feb 15, 2023 10:19:26 GMT
Early boxes have a washer/spacer between rod and cruciform, have you fitted it? bud I’m about to do it today. I know about the washer I put one on the other selector rod. I will use grease to keep it on. |
|
shepys
1st Class Ticket
Posts: 91
|
Post by shepys on Feb 15, 2023 15:03:21 GMT
It’s done. Went in easy no problem and i went on a little rid to test it and all is good. Going out on it tomorrow
|
|
|
|
Post by scooterbooter on Feb 16, 2023 0:01:44 GMT
Hoorah, tear it a new one for me old boy. You saved a load of faffing about. Good show.
|
|
