|
|
Post by maxifields on May 26, 2022 19:22:08 GMT
I want to install led indicators.( My scoot is currently ac) .I know led's will only work on dc and I've read you can change the wires on the stat plate but recommends you get a battery. Will fitting a 12v AC/DC Voltage Regulator do the job? Has anyone had any experience doing this ?Cheers.
|
|
|
|
ac to dc
May 26, 2022 20:10:45 GMT
via mobile
Post by adrian on May 26, 2022 20:10:45 GMT
I have gone full dc on my px, and yes a ac/dc regulator will do the job, I bought the bgm one and easy to wire up 👍 also went with lithium battery, because of size
|
|
|
|
ac to dc
May 26, 2022 20:12:20 GMT
via mobile
Post by adrian on May 26, 2022 20:12:20 GMT
I went full led headlight and rear light, well worth it 👌
|
|
|
|
Post by maxifields on May 27, 2022 19:38:24 GMT
Thanks for the advise Will a px indicator relay do the job?
|
|
|
|
Post by adrian on May 27, 2022 20:44:00 GMT
Thanks for the advise Will a px indicator relay do the job? I can't comment on that, because I have a cutdown without indicators |
|
|
|
Post by maxifields on Jun 11, 2022 19:26:39 GMT
I've fitted the ac to dc regulator (bgm)(dc) just for the indicators the light staying on ac but now the scoot won't start. I've checked I'have got a spark but the engines not even firing. I confused from my understanding from the regulator onwards is separate from the engine .Any advise would be much appreciated.
|
|
|
|
ac to dc
Jun 12, 2022 10:44:23 GMT
via mobile
Post by maxifields on Jun 12, 2022 10:44:23 GMT
Cdi unit. Had packed up
|
|
