|
|
Post by carlee23 on Apr 12, 2021 8:54:11 GMT
Hi I'm rebuilding my LML 125 What bearings should I grease when reassembling all of them? Using white lithium grease. Cheers
|
|
Jock
High Number
Posts: 184
|
Post by Jock on Apr 18, 2021 11:52:20 GMT
Gearbox use gearbox oil , little end bearings 2 stroke oil , big end ( crank bearing 2 stroke oil)
USE cooper grease -on engine bolt + studs that pass through engine , + exhaust bolt - DO NOT use on any bearings ! (as it is a anti seize grease for static fixings only ). High melting point on front hub bearings + steering bearings , hope that helps , Forgot rear shock mount bolt lower use copper grease , if using scooter throughout the year ,I would replace the copper grease - exhaust bolt + engine bolt , if they seize you got a whole lot of problems.
|
|
|
|
Post by scooterbooter on Apr 19, 2021 20:37:32 GMT
Yes Dave. Nice.
|
|
