|
|
Post by bigdeno123 on Mar 28, 2021 10:44:09 GMT
hi guys,
i have a px 125 that i have fitted a dr 177 kit including a 24/24 si carb with a drilled air filter and a sip road 2 exhaust. any advice on what jetting i should use?
|
|
|
|
Post by adrian on Mar 28, 2021 18:46:38 GMT
On the girlfriend's scooter, same set up, I am using the same jets as a p200 , have covered nearly 3000 miles on a roads and motorway and all running smoothly
|
|
|
|
Post by adrian on Mar 28, 2021 18:47:16 GMT
Nice introduction by the way 👌 manners 👍
|
|
|
|
Post by ianmartin40 on Mar 28, 2021 22:01:53 GMT
It should be noted that someone else`s jetting set up should only be used as a guide, as every engine is a little bit different possibly worth starting off too rich and slowly working your way leaner, if you start off too lean it can all end in tears!
Also a common tactic is to be too rich for running in as this will allow the engine to run cooler and less chance of nipping up new piston/rings/bore.
just my take on things
Ian
|
|
|
|
Post by scooterbooter on Apr 1, 2021 19:07:34 GMT
Agree with above but as a guide for you I had same set up 108 main. The rest standard p200. That was fairly rich and was super reliable. Good luck finding the magic number.
|
|
