grimbo
2nd Class Ticket
Posts: 3
|
Post by grimbo on Mar 2, 2006 13:14:01 GMT
I have just been given a px125 it was running fine,then all of a sudden it just wont kick at all and it cant be jumpstarted . The flywheel is not turning and it will only move with the clutch in. I am sure it has not seized as it was cold and was kicking as usual when this started to happen. The manual i have makes no ref to any problem like this. Can any one help please.
|
|
|
|
Post by Smallframe on Mar 2, 2006 16:20:54 GMT
when engine is off can you select any gears ?
|
|
grimbo
2nd Class Ticket
Posts: 3
|
Post by grimbo on Mar 3, 2006 11:16:36 GMT
Yes Clutch is working and gears can be selected,but kickstart wont budge.
|
|
|
|
Post by Smallframe on Mar 20, 2006 21:51:46 GMT
if the kickstart wont even budge with the clutch pulled in then its time to split ur casings and examine the kickstart return spring hasn't sheared or become dislodged, or the kickstart quadrant isn't funked. On the input shaft there is a kickstart idler gear and idler spring that move in and out when the kickstart whn the kikstart is depressed, check these out also.
|
|
grimbo
2nd Class Ticket
Posts: 3
|
Post by grimbo on Mar 21, 2006 12:01:41 GMT
Many thanks for replies,but now have her up and running. A spring had fallen somewhere near the fly-wheel stopping it from turning. Now the kick-start has fallen off ,told it needs a new one . After all this looking forward to spring time and some fun.
|
|
