LML Indicator Fault

[nathano]

LML 166 malossi,


Indicators work fine when stationary or at low speed (rougthly 5-10mph)  however once i speed up or apply more revs indicators will stop functioning and the "indicator function buzzer" goes ballistic, really fast buzzing co-insiding with fast flashing indy light on dash.   seems to be speed/rev related possibly vibrational?  just seems odd how they will function fine once engine has calmed down (can sometimes cut out after a period of being applied (probably battery so less worried about this)

any ideas?

any help appreciated thank you

(to those whom will just paste it i have already seen the speil about fault finding indicators... this is not yet a listed fault.)

cheers

[ironsloth]

Is this happening on all 4, or only front/back?

[nathano]

Dec 23, 2020 12:12:31 GMT ironsloth said:

Is this happening on all 4, or only front/back?

All 4, all function when stationary/low revs. None at speed.

[nathano]

Update: flashing with rear only

[adrian]

I had a similar problem, would one work on high revs, changed the relay and problem solved , but I checked all the wires and earth's and cleaned the switch first. Indicators are a real pain 😔 have just got a 1980 px without indicators so won't have this problem again 😁

[nathano]

Fault fixed: one of the wires (white) behind the switch had snapped. Re-soldered works perfectly.

[scooterg]

I’m sure that was in the wiring fault
Wires behind the switch