1970s Vespa 50S starting issues

[Vespucci]

Hello. I have a 1970s vespa 50s with dr75 cylinder, shbc 19.19 carb with standard jets. The engine wont start at all. Sometimes it started then died, now it wont start at all..i cleaned the carb, changed the floater and needle.
Compression is ok (new rings and piston)
It has spark..color blue...but i dont know if it is a good powerful spark, or a weak one.
Fuel gets to the cylinder...because it always wets the spark plug (gas and black oil color) while trying to start.
Tried everything..choke on, choke off...mixture screw...idle screw...no results.

I can see inside the stator plate, the wires and stuff seem oily...the engine was totally restored one year ago and has been sitting in the garage till now.
Can the stator plate be the cause? Or does this sound like a carb issue?

Thanks

[scooterg]

Use the intro section

[alan34]

Hello if stator has oil around it your crank seal could be leaking couseing a weak mixture. Look at bottom of casing under flywheel to see if there is any oil staining good luck.

[Vespucci]

Oct 18, 2020 12:15:47 GMT scooterg said:

Use the intro section

Why?

[Vespucci]

Oct 18, 2020 15:37:22 GMT alan34 said:

Hello if stator has oil around it your crank seal could be leaking couseing a weak mixture. Look at bottom of casing under flywheel to see if there is any oil staining good luck.

It doesnt leak..maybe the oily stuff was already at the wires when i got it.

[scooterg]

It’s polite to introduce yourself
But you can just jump in with a question
You being special like

[Vespucci]

Oct 19, 2020 19:34:27 GMT scooterg said:

It’s polite to introduce yourself
But you can just jump in with a question
You being special like

Im not very familiar with forums...been struggling to find how to post here also.