alps
High Number
Posts: 168
|
Post by alps on Jan 23, 2006 23:32:57 GMT
help... i have wired up 5 spots on the front of my px but when i try to conect to the main headlight nothing happens. do they need to be earthed or run direct to the battery? any advice will be nice?? (be gentle)  |
|
|
|
Post by Spence on Jan 24, 2006 12:32:16 GMT
Hi alps, welcome to the forum.
How have you got your spots wired up at the moment? Have you tried running the wire along the underside edge of your floorboards and straight up to the battery?
|
|
alps
High Number
Posts: 168
|
Post by alps on Jan 25, 2006 0:25:02 GMT
hi spence thanks for the reply
my spots are wired up and i have run a cable up through the horn cover and come out under the headset, which is at the moment in the back of the garage with frustration. i tried the terminals at the back of the head light without success. do you think i should run it straight to the battery?
|
|
|
|
Post by Spence on Jan 25, 2006 12:30:31 GMT
I have seen spots wired in through the horncast, but I don't know what happens on the inside! The last set of spots I saw wired up were run along the floorboards to the battery. It's probably a cruder way to do it, but it might be simpler unless someone else knows how to do it within the headset.
My spots aren't connected because I got them as a job lot on Ebay and not all of them work.
|
|
alps
High Number
Posts: 168
|
Post by alps on Mar 6, 2006 0:14:35 GMT
all lights are up and running now thanks for your help spence. i have run my main spoties from the ignition loop (these go on even why my scoot is not running so i have now got a flat batterie,something to watch out for in the future) my bullet lights run from the side light switch's so these dim and brighten as the revs go higher. still got loads of chrome to put on trying to get it all clean and sparklin for gingers egg run but the weather is a bit s*@#*y at the moment.
hope to see you there..
"hurry up rob and get your lammy to-gether"
|
|
