|
Post by paleking55 on May 6, 2019 22:09:20 GMT
Noticed that my right indicators and brake lights were not working. Checked and they had blown. Thought it was possible that it was just time for a change as they'd last been replaced a few years ago.
Unfortunately, the new bulbs blew within a day of replacement.
My first thought is that it's not a problem with the voltage reg as the other bulbs work normally.
Any suggestions thanks
|
|
del
1st Class Ticket
Still riding a 125. 200 still on bench.
Posts: 82
|
Post by del on May 7, 2019 0:11:41 GMT
Hello. Check the voltage across one of the bulbs. it should stay at 12V when you rev the engine. Personally I would change the regulator. When mine went wrong it was the small bulbs which blew first. For safety I would change the main headlight bulb as well. even thought it might still work, it's been stressed electrically and won't last much longer.
|
|