|
Post by mijapxman on Sept 16, 2017 20:59:01 GMT
Taken from mista Freak MoPed's YouTube site.
Mij☺
|
|
|
Post by bryno on Sept 18, 2017 10:27:40 GMT
Good stuff.
My 2 SIP taps leaked from new so personally I don't think the seals degrade in the fuel and block the tap as the video suggests.
After having one fitted for a couple of years which never shut the fuel off totally I finally got round to removing it and turning the seal round, now it shuts off just fine.
Seems to me the seals are just poorly punched leaving a lip around each hole, this needs to be flat and smooth to seal, which they are on the other side.
Worth a try if you are struggling with a leaky SIP tap.
|
|
|
Post by mijapxman on Sept 18, 2017 17:31:18 GMT
Bryno I see what your saying 👍, I fancy trying it on my sip tap at some point, to try and get it flowing a bit faster, just because sometimes, I like a wee tinker 😉.
All the best.
Mij☺
|
|