|
Post by jonisingt35r on May 20, 2016 13:31:40 GMT
hi
I'm currently adding oil to my fuel, I'm trying to fix my autolube system, is there anyway to make sure it works?
ive removed the small pipe that goes into the carb and it is clear is this sufficient? is there a way to test that oil is getting into the piston
really don't want a seized engine if I can help it
thanks
|
|
|
Post by bryno on May 20, 2016 14:16:01 GMT
if you have taken the small pipe off, filled up the oil tank, bled the tube and re-attached it will still have air in it, you will see a bubble.
Continue to run with oil in the tank and wont be long before the bubble will be gone if the autolube is working (you will see within a tank full).
This isn't fool proof of course depending on what the fault was you are trying to fix.
|
|