garyp
2nd Class Ticket
Posts: 26
|
Post by garyp on Jan 17, 2008 17:35:01 GMT
Dear All
I just bought a PX125 disc and am having some electrics problems. When I turn the bars all the way to the left, the headlight cuts out (rear indicator too). I think there may be a wire being squished by the clamp for the headset base.
Can anyone tell me how to remove the bottom of the head - I know how the top cover comes off? Is it just the nut on the column or do I need to do something else? Also, does anyone know where I can get an on-line diagram of it?
Thanks
Gary
|
|
|
Post by bryno on Jan 17, 2008 17:56:19 GMT
IIRC, pop the top off, remove the lower headset bolt and wiggle it off you may need to disconnect the cable ends for clutch and front brake, but you'll see that when you start to lift the headset off, there is enough movement in the gear cables/electrics to pull the headset off and lay over the back of the headstock without disconnecting them..
|
|
garyp
2nd Class Ticket
Posts: 26
|
Post by garyp on Jan 20, 2008 11:27:34 GMT
That's great - thanks.
Once the top of the headset was off it all became apparent!
Gary P
|
|
|
Post by Ironduke on Jan 22, 2008 20:56:59 GMT
Scooterhelp.com has all the wiring diagrams usually. Don't forget to check your connections in the switch.
All the best
|
|