|
Stand
Aug 7, 2014 17:52:36 GMT
Post by pxguru on Aug 7, 2014 17:52:36 GMT
My centre stand spring broke today. So annoying It is the original one but I think this might be the wrong type of spring for my PX Disc. Beedspeed says it should have 2 thinner ones. Any ideas? Attachments:
|
|
|
Stand
Aug 7, 2014 19:16:17 GMT
via mobile
Post by rab on Aug 7, 2014 19:16:17 GMT
Mine has 2 brackets 1 spring long ends there is 2 types so you need to get under and look. The spring in the pic looks more like the exhaust spring
|
|
bsr65
High Number
Posts: 114
|
Stand
Aug 7, 2014 20:25:09 GMT
Post by bsr65 on Aug 7, 2014 20:25:09 GMT
That one is same as mine, think the two thin one's were for T5's for exhaust clearance, also think the thin one's are fitted to the PX relaunch models, thin one' are defo easier to fit.
|
|
|
Stand
Aug 7, 2014 22:06:25 GMT
Post by sbwnik on Aug 7, 2014 22:06:25 GMT
Yes, the thinner ones are the current ones, originally used on the T5. Both will do.
|
|
|
Stand
Aug 8, 2014 12:42:39 GMT
Post by pxguru on Aug 8, 2014 12:42:39 GMT
Thanks everyone, that confirms it, my scooter is a Friday afternoon special It does have 3 slots in the frame and two spring holes in the stand but only had 1 big spring. I will get the two thin springs ordered and put it right.
|
|
|
Stand
Aug 8, 2014 18:50:55 GMT
Post by rab on Aug 8, 2014 18:50:55 GMT
half my scoot is t5 parts rest px its a px mash up
|
|