|
|
Post by avakak on Jul 5, 2005 13:04:44 GMT
Can anyone help ? have PX125E (1985) recently had to replace inner hub circlip. Put everything back together fine (i'm sure) but then soon after front brake pulls steering to the left quite severely and after many times removing the front hub to try and find out whats going on am totally mystified.Would appreciate any advice.Thanx.
|
|
|
|
Post by Smallframe on Jul 5, 2005 16:07:57 GMT
Did you undo the backplate that the shoes sit on ?
|
|
|
|
Post by avakak on Jul 5, 2005 17:58:01 GMT
No,didn't touch the brake shoes at all,but made sure they were in their normal position
|
|
|
|
Post by Smallframe on Jul 6, 2005 17:29:28 GMT
Bit of a strange one that. So you have just replaced an inner circlip and the hub is back on its splines nice and tight. All washers/ spacers back in place i hope ? scoot wasn't pulling to left prior to circlip replacement? why did you replace it ? Are the brakes more fierce since you replaced the circlip?.
My immediate thoughts were that there was something left out, or spring clip come off one of the shoes, ovalised brake drum, rim on the wrong way round (safro-caribbean) but without being there and seeing the scoot I'm just speculating
good luck
|
|
