AAAAAHHHHHH - Wiring Loom woes

[stevomtb1]

HELP!!!!!!!!!!!

How do you remove the wiring loom?

Won't pull through from back to front through legshield and the plug on the front means it won't go front to back.

Any ideas.

It's a smallframe Vespa.

[Spence]

Hang in there Stevo, I'll see if I can make contact with our resident Smallframe expert, who's been conspicuously absent of late.

[Smallframe]

a conspicuous hello to everyone. i assume when you refer to a plug on the loom you are referring to a pk then ?

davedaniel.proboards91.com/

speak to juan on the above link which is actually a smallframe specific forum, if it is a pk he will have the solution (he loves em ). If its a primmy/ classic shape then with the exception of the 100 sport then I don't know anything about a plu being on the front of the loom.

Ps. got a modified x loom in my smallframe and it was a tat to fit
, took 3 of us all holding different lengths of string and wire, but the scooter was complete and still on the road

[stevomtb1]

Hi and thanks for the replies.

It is a PK50XL.

There is a kind of multi-plug which snap-fits under the horn cover thingy and it's too big to thread down the steerer tube.

Will give Juan a go.

Thanks again.

[gamba]

I've always found fitting and removing easier through the horn cast. Good luck withdat!