stevem
2nd Class Ticket
Posts: 11
|
Post by stevem on Nov 5, 2006 19:27:02 GMT
1966 Vespa 125 super...
How on earth do I remove the front brake drum?
I've removed the wheel & hub nut, released the cable but the drum wont come off.
Do I whack it with a big hammer or is there a secret?
Cheers
|
|
|
Post by bryno on Nov 5, 2006 20:40:40 GMT
Hmm, try tapping the hub behind the wheel studs and rotate it as you do, hammer and wooden block. Slightly more drastic action is to strike the centre of the hub shaft to break the contact, but there is the risk of damaging something doing that, so bit of a last resort (though I had to do that to get my rear hub off ).. good luck.
|
|
stevem
2nd Class Ticket
Posts: 11
|
Post by stevem on Nov 6, 2006 19:42:18 GMT
Thanks,
I used a heat gun & a soft mallet in the end. Worked a treat.
|
|