|
Post by grahamyork on Oct 21, 2006 19:02:16 GMT
poor starting on cold but fine when warm. removed plug to clean and was amazed to find the side electrode only covered half the centre electrode and the plug gap was 27 thou. none of the dealers i've tried have the Champion specified for the 200 but all had the NGK meant for the 125. can i use this without any probs or is the strange electrode set up correct for the Champion plug and should I try more dealers ? never seen it before and the scoot starts ok when warm and performs fine. the side electrode looks to be made that way and is not burnt or bent away. thanks
|
|
|
Post by dto79px on Oct 24, 2006 19:49:44 GMT
sounds like the chimps been to work again ;D
|
|
|
Post by Big Scotty on Oct 26, 2006 9:23:01 GMT
Worth getting a new plug & trying it out mate? Never had the plug out on my GT so can't confirm the design. I'll have alook this weekend if you like?
|
|