Drunk
2nd Class Ticket
Posts: 10
|
Post by Drunk on Sept 28, 2006 19:22:09 GMT
Is there a specific tool i need to remove a rear hub, i need to change the brake shoes on my 50, iv took the wheel off brake drum and the split pin, I just cant get a grip or stop the hub from moving to remove the castlenut.
|
|
|
|
Post by bryno on Sept 28, 2006 20:10:02 GMT
If you can't get the nut off try putting the wheel back on, scoot on ground and get someone to stand on the brake pedal, use a long pole on the end of your socket/torque wrench, should do the trick... or launch the scoot into the air of course  , If the hub is stuck on with the nut removed, use a rubber mallet to tap on the other side of the hub. good luck. |
|
,