|
P200
Apr 27, 2008 19:45:08 GMT
Post by dave1967 on Apr 27, 2008 19:45:08 GMT
Help Please My friend has put a P200 engine in a GL frame, no problems with that but before fitting the engine he fitted new oil seal and bearings, all runs fine but smokes like a london bus so split casings again and changed oil seal again, ran fine put away in shed before Christmas no worries. He took it out today started it up and guess what smoking like the bus again blowing oil out of exhaust so looks like seal again . Now we have between us rebuilt loads of vespa engines and never had this problem before so we are stumped. Any ideas would be welcome. Cheers Dave
|
|
|
P200
Apr 27, 2008 20:23:19 GMT
Post by elviswasamod on Apr 27, 2008 20:23:19 GMT
hi dave exact thing happened to me not so long ago i rebuilt engine new bearings seals etc and guess what smoked as you said like a london bus the problen was the build up of oil in the exhaust so i washed it out with lots of parrafin the give it a good ragging to burn of the excess then it was fine hope this helps ferdy ps the oil coming out of the exhaust was that bad my rear white hub became black
|
|