mo2470
1st Class Ticket
Posts: 55
|
Post by mo2470 on Feb 25, 2024 12:27:25 GMT
Hi all
Just fitting a sip 2 exhaust on my PX.
Were do you anchor the back spring to ??
Mo.......
|
|
|
|
Post by adrian on Feb 25, 2024 16:00:37 GMT
On my bgm big box I had to weld tabs onto exhaust, don't know if sip has tabs, and drilled a hole through one of the barrel fins, hope this helps
|
|
|
|
Post by gpowell on Feb 25, 2024 18:59:27 GMT
2x spring lugs on the SIP pipe.
One goes to bottom front fly cowling with a small bracket.
One needs the cylinder or head drilling.
You might need the cylinder stub shims.
Or a sealant.
You using cast or ali cylinder stub?
|
|
|
|
Post by citydaz on Feb 25, 2024 19:56:55 GMT
i didnt bother attaching the springs.
|
|
|
|
Post by gpowell on Feb 25, 2024 21:02:26 GMT
The springs are for ali stubs, if cast just use the clamp
|
|
mo2470
1st Class Ticket
Posts: 55
|
Post by mo2470 on Feb 26, 2024 9:18:59 GMT
2x spring lugs on the SIP pipe. One goes to bottom front fly cowling with a small bracket. One needs the cylinder or head drilling. You might need the cylinder stub shims. Or a sealant. You using cast or ali cylinder stub? Ali cylinder and stub . Mo........ |
|
