allan
2nd Class Ticket
Posts: 17
|
Post by allan on Dec 7, 2023 11:21:08 GMT
Does anyone know where I can find the test values for the Bajaj CDI coil and stator that's commonly used for 12v conversions? Primary and secondary coil resistance, resistance values between each stator wire etc.
These parts are on a GL project with a MotoVespa GS150 motor and it's not producing a spark. I'm 90% sure I've wired it correctly as I've found diagrams and a few photos that all match it, and the terminals are labelled with the wire colours anyway.
|
|
allan
2nd Class Ticket
Posts: 17
|
Post by allan on Dec 7, 2023 14:08:54 GMT
I've poked around with the multimeter measuring resistance and AC voltage across most wires. It turned out to be a faulty coil, open circuit from the terminal to earth unless the terminal was firmly pushed to one side. Better still with it pushed I get a nice clear blue spark
Edit, I spoke too soon as I had only tested the ignition side, there's a fault on the power side. I'm going to have to pull the flywheel and take look at the stator.
|
|