shepys
1st Class Ticket
Posts: 86
|
Post by shepys on Nov 8, 2023 12:44:45 GMT
I put a cosa 2 clutch in my vespa T5 but I get a bit of drag and sometimes hard to get in 3rd. I’ve tried setting the cable but it’s no good. I read about a 0.8 spacer washer what goes behind the clutch with the standard spacer washer. Is that what I need.
|
|
|
Post by gpowell on Nov 8, 2023 21:01:54 GMT
Id be inclined to strip the clutch and make sure all is free inside, plates free against turrets etc
Have you changed the spacer (sat against bearing)
|
|
shepys
1st Class Ticket
Posts: 86
|
Post by shepys on Nov 8, 2023 22:27:16 GMT
No bud I haven’t change the spacer what’s behind the clutch. It’s the standard cog one what’s meant to be in there. I did strip the clutch earlier and found the bush is turning and the first and second metal disc are the wrong way round. The one with the notch was at the bottom and the thicker one was in after. The clutch was put together wrong. I have ordered a new bush.
|
|
|
Post by ironsloth on Nov 8, 2023 22:52:07 GMT
Thinking about it, I had this happen to me before, but it was a few years ago, and turned out to be a dodgy built batch.
|
|