allan
2nd Class Ticket
Posts: 17
|
Post by allan on Sept 20, 2023 9:52:43 GMT
photos.app.goo.gl/g3EqzxA6JHVYDXmX7Hopefully the link to the photo will work. I also tried the add image icon but it hasn't worked. It's a 62 GL with an 04M MotoVespa motor. Next job is fitting the loom and cables to the frame but before doing that I'd like to understand what I've got, what's missing, confirm it all fits together, and have some idea of where each part mounts. I didn't buy any of these bits separately, it all came in boxes as a project so I don't have much knowledge of what I've got. Some parts are marked Baja. Clearly missing a brake pedal switch, don't need an indicator relay. Diagram that came with the loom seems to show a combined CDI and coil, mine are separate. I don't know where the CDI should be mounted. I don't know if this is an AC or DC system, not sure if it's a combined reg/rec making it DC or not, it has 3 connections. I don't know where this should be mounted either. Dash needs an extra wire running for the CHT censor, might be best to tape/tie it to the loom. Not shown in the pics I've also got two different horns at least one is 12v, two different rear lights and assembled handlebars with headlight and switches.
|
|
allan
2nd Class Ticket
Posts: 17
|
Post by allan on Sept 21, 2023 10:17:53 GMT
After a few searches it looks like it's a 12v AC no battery setup, possibly all Baja. I've ordered a brake light switch. I'll need to check the instructions for the dash to make sure it's ok with AC.
Edit yes dash is ok with AC, also found some notes the PO made about the stator, regulator and CDI wiring.
|
|