|
Px200
Aug 26, 2023 15:47:38 GMT
via mobile
Post by scootjon68 on Aug 26, 2023 15:47:38 GMT
Hi, can anyone tell me if i can use a cylinder head spacer together with a malossi cylinder head with an o ring? many thanks.
|
|
|
Px200
Aug 27, 2023 11:05:22 GMT
via mobile
Post by gpowell on Aug 27, 2023 11:05:22 GMT
I'm not up with this head but.. Is the top of the cylinder (the sealing face for head) grooved to match that of head and o ring. Or does the o ring just flatten onto a plain surface. If its the latter then no issue, if its the former you may need to consider ditching the o ring and making sure all sealing surfaces are perfect and use a sealant
|
|
|
Px200
Aug 27, 2023 12:57:54 GMT
via mobile
Post by scootjon68 on Aug 27, 2023 12:57:54 GMT
It’s an o ring onto a flat surface so I’ll keep the O ring and use sealant. Much appreciated.👍🏻
|
|
|
Px200
Aug 28, 2023 9:55:21 GMT
via mobile
Post by gpowell on Aug 28, 2023 9:55:21 GMT
Make sure the cylinder and pack plate are perfectly flat. DIY with a mirror/glass and some wet and dry.. Check youtube if you need any visuals
|
|
|
Px200
Aug 29, 2023 18:11:20 GMT
Post by scootjon68 on Aug 29, 2023 18:11:20 GMT
Yes I’ve read about that. Thanks for your help!
|
|