|
|
Post by tonymyles on Oct 5, 2022 16:39:37 GMT
Having problems trying to fit engine do I need to adapt the frame or am I doing something stupid fitted the long boltfor engine mounting but can't see how it's going to line up with the shock absorber appears to be about 2 inches out I understand you can extend the length of the shock absorber but the problem is lining it up horizontally
|
|
|
|
Post by gpowell on Oct 8, 2022 9:00:40 GMT
Done one a long time ago and dont remember any issues as fundamentally the engine block is the same
|
|
|
|
Post by alan34 on Oct 8, 2022 14:20:20 GMT
Eh up. sounds like you need to jack engine up to be in line with shock then screw bolt through.keep trying cheers alan.
|
|
|
|
Post by adrian on Oct 8, 2022 18:50:15 GMT
I have a vague recollection, that there is a bracket/conversion to move engine back at little in frame so shock absorber fits correctly
|
|
|
|
Post by gpowell on Oct 10, 2022 19:01:09 GMT
/\ you maybe thinking about the wide frame conversion cradle.
Px will go straight in a 150 super.
Try to get the engine in with as little pivot as possible on the main bolt.
The shocker has a lot of movement
You may need to play around with shocker height as 150S are slightly longer than PX
Need to consider the wheels 8" or 10" conversion required both availble.
|
|
