bawbag
1st Class Ticket
Aye
Posts: 76 
|
Post by bawbag on Jan 28, 2021 22:15:05 GMT
Is there a 200 crank that can be fitted using a Reed block that you don’t need to machine the casings?
|
|
|
|
Post by adrian on Jan 29, 2021 5:45:45 GMT
Simple answer is no, you have to machine the pad
|
|
|
|
Post by scooterbooter on Jan 29, 2021 17:37:30 GMT
Big job
|
|
|
|
Post by adrian on Jan 29, 2021 18:50:38 GMT
No it's not a big job. If you do a search on YouTube there are some great videos on the subject
|
|
bawbag
1st Class Ticket
Aye
Posts: 76
|
Post by bawbag on Jan 29, 2021 20:20:49 GMT
Will Reed block work without casing work?
|
|
|
|
Post by scooterbooter on Jan 30, 2021 9:22:08 GMT
You need to do the casings. Otherwise the reeds only sit over the crank .an it should be right on top vertically downward into barrels entrance I reckon. Big job unless you go down the Peugeot route
|
|
|
|
Post by scooterbooter on Jan 30, 2021 9:27:29 GMT
Peugeot style is quite cheap and cheerful. But it is just that. Might be ok ish on a stockie. But then if you got a good stockie why are you.....
Not trying to be a nob. But I dont think it would work very well. Have you stacked your pad?
|
|
bawbag
1st Class Ticket
Aye
Posts: 76
|
Post by bawbag on Jan 30, 2021 12:40:54 GMT
Peugeot style is quite cheap and cheerful. But it is just that. Might be ok ish on a stockie. But then if you got a good stockie why are you..... Not trying to be a nob. But I dont think it would work very well. Have you stacked your pad? Mallosi vOne rotary casings running Malossi 210 |
|
|
|
Post by scooterbooter on Jan 30, 2021 14:01:53 GMT
Not gonna start this now! But V ones are well ahead. Well ahead
|
|
|
|
Post by adrian on Jan 30, 2021 18:17:44 GMT
Not gonna start this now! But V ones are well ahead. Well ahead Ok need to ask, please explain what v1 are and why they are so good ? |
|
|
|
Post by scooterbooter on Jan 30, 2021 23:51:11 GMT
The new malossi casings big design change loads stronger just absolute quality no big gasket big f off ports lovely finish exactly what casings should be. Cant recommend enough.
|
|
