|
Post by antvespa on Mar 13, 2019 11:54:32 GMT
Does anyone know a good way of removing the rear wheel hub/plate off a Vespa VBB - its the plate with the 4 bolts that attaches the wheel and sits on the main spindled drive axel.
Do I need a special tool? Seems to not want to come off that easily, I removed it about 2 years ago when I took the engine apart but can't remember how i did it.
|
|
Perkin
2nd Class Ticket
Posts: 39
|
Post by Perkin on Mar 13, 2019 20:28:23 GMT
Maybe a bit of penetrating oil to soak the splines for a few hours, then tap radially around the edge of the hub with a nylon or hide mallet?
|
|
|
Post by antvespa on Mar 18, 2019 12:08:29 GMT
Maybe a bit of penetrating oil to soak the splines for a few hours, then tap radially around the edge of the hub with a nylon or hide mallet? Worked a treat thank you - I thought I needed a specialist tool
|
|