|
Post by antvespa on Feb 12, 2019 16:55:50 GMT
|
|
|
Post by mijapxman on Feb 13, 2019 16:13:10 GMT
Antvespa, the bulbs will just clip in, it will be obvious once you have the light in your hands.
If you click on the downloads part of your link, it shows what needs soldered.
If you are not sure what wire is the driving/ night light and what is the brake light wire, look how they are wired on the light you take off.
good luck.
Mij☺
|
|
|
Post by antvespa on Feb 13, 2019 17:20:19 GMT
Antvespa, the bulbs will just clip in, it will be obvious once you have the light in your hands. If you click on the downloads part of your link, it shows what needs soldered. If you are not sure what wire is the driving/ night light and what is the brake light wire, look how they are wired on the light you take off. good luck. Mij☺ Wow now I feel stupid for not clicking the link - the connection looks a lot more Bodge that I was hoping for I must admit. My bike came without a rear light and since being paintedI'vee re-assembling and updating the wiring with a 12v loom so I don't have any reference to which bulb is which.
|
|
|
Post by mijapxman on Feb 13, 2019 18:44:23 GMT
Can you see the wires that plug into the back brake light switch? One will be earth, one live(,12v if you have a 12 stator) test with a multi meter, with engine running OR tell us what colour wires you have going to the back brake switch and what colours of wires you have going to the back light? And we'll see if we can figure it out for you, Bud 😉 This may be important to you 👇? modernvespa.com/forum/topic163667Good luck. Mij☺
|
|
|
Post by antvespa on Feb 14, 2019 9:54:06 GMT
Haha that's my other link on MV - to be honest, I always come across unhelpful people on MV that if it's not 100% original they aren't interested.
When i get around to wiring the light I will be back on with questions if i have any.
|
|