cakey
2nd Class Ticket
Posts: 18 
|
Post by cakey on Jun 27, 2018 20:24:12 GMT
I’ve fitted a sip speedo all is working well apart from the speed sensor that uses the little magnet. It works but reads 11 mph when I’m going about 25-30 ish!
I’ve set the rolling circumference of the 3.50 x 10 at 1370. The magnet is araldited to the side of the wheel rim.
The instructions supplied are pretty useless!
Thanks in advance for any help
Regards cakey
|
|
|
|
Post by shipscat on Jun 28, 2018 7:31:40 GMT
not an expert but if you've in-put the tyre circumference and then mount the magnet to your rim the rolling distance of your tyre will be diferent to the rolling distance of where you have placed your magnet ie shorter
|
|
|
|
Post by mijapxman on Jun 29, 2018 16:11:14 GMT
I’ve fitted a sip speedo all is working well apart from the speed sensor that uses the little magnet. It works but reads 11 mph when I’m going about 25-30 ish! I’ve set the rolling circumference of the 3.50 x 10 at 1370. The magnet is araldited to the side of the wheel rim. The instructions supplied are pretty useless! Thanks in advance for any help Regards cakey Hopefully this video will be of some help👇.Did you measure your tyre accurately? If that's no help, get back to us Bud and we'll try something else. Good luck. Mij☺ |
|
