jetting advice

djf45
2nd Class Ticket

Posts: 6

jetting advice Jan 11, 2018 4:07:34 GMT via mobile

Quote

Post by djf45 on Jan 11, 2018 4:07:34 GMT

I'm running a 166 malossi 26/26 spaco si , mazz crank, scootRS pipe on a reed valve lml engine currently using jets supplied with malossi kit which seemed ok with the sito plus ,but since bolting the SRS expansion on had a heat seize and feels like it needs an upset any advice on where to start would be much appreciated
Cheers in advance fellow Italian / indian shopping bike enthusiasts😀

henri Ace Face its not about pulling up in a perfect 3 point turn an stepping into ya grave sayin "is that it" .H Posts: 4,712	jetting advice Jan 11, 2018 8:30:27 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by henri on Jan 11, 2018 8:30:27 GMT you need to tell us what sizes youve got in that was ok for sito to make a guess at upjet for srs pipe .H
	if its got wheels n makes a noise I wanna play with it, skateboards included coz "skate-punks rule",

phattanglo Ace Face Posts: 658	jetting advice Jan 11, 2018 12:07:42 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by phattanglo on Jan 11, 2018 12:07:42 GMT Also check if the kit would benefit from a cooler plug. I've experienced soft seizes which were caused by the plug heat rather than jetting.

Post by djf45 on Jan 11, 2018 4:07:34 GMT

Post by henri on Jan 11, 2018 8:30:27 GMT

Post by phattanglo on Jan 11, 2018 12:07:42 GMT