L12ARD
1st Class Ticket
Posts: 82
|
Post by L12ARD on Dec 6, 2017 15:25:36 GMT
replacing an outer/inner clutch cable on my T5 milly (PX with a t5 lump) Halfway through pulling the new/old outer through with the help from a extra long throttle cable the nipple comes off and I'm stuck half way new outta isn't connected to the old one ....ARRRGGGHHHH
any help/advice greatly appreciated as I cant thread a new inner through to pull the outer cable back through where the rear brake cable exits the frame ... ...
|
|
|
Post by henri on Dec 6, 2017 16:34:23 GMT
sorry , but its a horncast off an maybe also drop the brake block . which end is it in ,if its from rear theres a chance its past under the tank .so you wont have to remove tank to guide it ,if you started at top tank will have to come out . H
|
|
L12ARD
1st Class Ticket
Posts: 82
|
Post by L12ARD on Dec 7, 2017 5:09:21 GMT
its still in the headset end just cant find it through that hole at engine end where cable should come through , will have a tinker over weekend , looks like i'll be getting to know the scoot a lil' deeper than I wanted too lol ..
Cheers H
|
|