gillie
1st Class Ticket
Posts: 62
|
Post by gillie on Aug 3, 2017 23:36:49 GMT
hi guys i have an issue with a leaking late internal seal and i believe it can be fixed with an external corosponding /correct seal to the hub on the engine 30 or 27mm but is it as easy as taking out the dust cover and putting the seal in? thanks in advance
|
|
|
Post by henri on Aug 4, 2017 7:21:11 GMT
yes , dust seal out an right,27 or 30mm seal to match hub centre in, an also you need to block the drain hole underneath were bearing sits .most do it with a self tapper screwed in with araldite or jb weld to seal it .H
|
|
|
Post by mijapxman on Aug 4, 2017 13:06:08 GMT
As Henri says, I've done the exact same thing to my PX disc engine.
Ride safe.
Mij☺
|
|
gillie
1st Class Ticket
Posts: 62
|
Post by gillie on Aug 8, 2017 21:58:48 GMT
thanks for the replys guys thx ill get right to it !
|
|
gillie
1st Class Ticket
Posts: 62
|
Post by gillie on Aug 21, 2017 23:17:52 GMT
i have had a quick look but can find a hole to block up ?? does anyone have a pic please
|
|
|
Post by mijapxman on Aug 30, 2017 14:46:39 GMT
|
|