|
|
Post by scooterg on Jul 11, 2017 17:18:51 GMT
Anyone here from the Glasgow area,who can adjust the mixture screw for me,
Just can't get it,,all sounds the same to me,,and when I ride it,it's holding back 3quarter throttle quickly and it just holds back stutters
cheers g
|
|
|
|
Post by ironsloth on Jul 11, 2017 19:58:25 GMT
Is mij your neck of the woods?
|
|
|
|
Post by scooterg on Jul 11, 2017 21:33:02 GMT
Who ??
Don't know who that is?
When I adjust the screw I can't hear any difference, so was hoping for someone nearby that knew what they were doing
i had had to bend a spanner and then tape it to a screwdriver,so I could get the screw to turn.
starter motor gets in the way. And the thing doesn't have a groove for a screwdriver to go onto
|
|
|
|
Post by mijapxman on Jul 11, 2017 21:37:21 GMT
Ironsloth, I'm on the other side of the country, Mate.😉
|
|
|
|
Post by scooterg on Jul 11, 2017 23:01:50 GMT
A little to far,,and with a bit of adjustment needed it's even further lol
|
|
bawbag
1st Class Ticket
Aye
Posts: 76 
|
Post by bawbag on Jul 13, 2017 23:11:59 GMT
Anyone here from the Glasgow area,who can adjust the mixture screw for me, Just can't get it,,all sounds the same to me,,and when I ride it,it's holding back 3quarter throttle quickly and it just holds back stutters cheers g Where are you? Ayrshire here |
|
|
|
Post by johnnymarr on Jul 14, 2017 18:33:36 GMT
scooterg did you not think of me? dont you remember I only live around 15 mins away...i adjusted mine last year and struggled with screw too and bought hooked pliers - still struggled ...theres a few posts here and a good one by either vespasco or sime66 i think...
|
|
|
|
Post by johnnymarr on Jul 14, 2017 18:37:18 GMT
by the way i also cut a groove into the head and still struggled that starter is a pain
|
|
|
|
Post by scooterg on Jul 14, 2017 18:53:41 GMT
👍 just put it up hoping for someone could sort it for me
Don't know what it's supposed to sound like
Could bring it to you Sunday if you don't mind
|
|
|
|
Post by johnnymarr on Jul 14, 2017 21:17:05 GMT
Sunday after 3 would be fine for me...I can come to you if not running good
|
|
me
High Number
Posts: 105
|
Post by me on Jul 14, 2017 21:26:58 GMT
Air screw is really only for or up to 1/4 throttle - if its struggeling on not playing ball at antything more than 1/4 throttle then don't go near the air screw.
Has this been a constant problem or a thing that has just started. It could be a simple air filter clean or a partially blocked main jet that will cure this problem.
|
|
|
|
Post by scooterg on Jul 14, 2017 21:56:19 GMT
It's got a new malossi kit (going to fast kills them) so for now I'm running it in
But it's just that holding itself back,,,,it's so annoying
And need someone who knows what there doing to look at the plug,,colour,and adjust to it
|
|
|
|
Post by scooterg on Jul 14, 2017 21:57:40 GMT
Johnny
Sunday after 3 is fine,,I can come to yours it runs ok,,,just holding back
|
|
|
|
Post by johnnymarr on Jul 15, 2017 13:57:48 GMT
thats fine, pm your moby .i was also thinking filter/ jet clean and have spray for this
|
|
