|
Post by eadmr04 on May 10, 2017 12:13:58 GMT
I'm selling a T5 gearbox and layshaft and have been asked if it will fit into a 2003 PX200E, anyone know if they are a straight swap?
|
|
|
Post by mijapxman on May 10, 2017 13:06:14 GMT
eadmr04, Yes it'll fit, but gearing will be too high on a standard 200.
all the best.
Jim☺
|
|
|
Post by ironsloth on May 10, 2017 18:10:59 GMT
Is it still worth changing the 4th gear on the p200 for the T5 one? Just out of curiosity?
|
|
|
Post by mijapxman on May 10, 2017 20:57:09 GMT
Ironsloth,Rule of thumb,Grunty kit,(lots of torque) should pull a standard 4th gear, revy kit T5/px125 4th gear. All the best. Jim☺
|
|
|
Post by henri on May 11, 2017 6:10:10 GMT
it will fit but you'd need to change the clutch centre aswell or primary gear on tree ,a p200 clutch ,23 teeth wont match a t5 primary 68 teeth . the loose gears an trees are the same tooth count with just 4th being shorter .H
|
|
|
Post by mijapxman on May 11, 2017 6:46:34 GMT
Henri, well done,I never even thought about the clutch.
Jim☺
|
|
|
Post by pxguru on May 12, 2017 3:42:06 GMT
For all out there with a Malossi 210 that is the fastest thing ever in 3rd but a huge disappointment in 4th (even if you have a T5 36 tooth cog already), this T5 gearbox, with the 22/68 primary will give you the scooter you always wanted
|
|