|
Post by alpharitto on Dec 9, 2018 13:18:06 GMT
Just nearly crapped myself,been out today tinkering with my scooter because blew all my bulbs yesterday,thought I'd check the plug because made a few adjustments 2 the jetting gone from a 124 main to a 118 because it was struggling at 50mph seemed as though it was holding back,ran nice and picked up well with the 118 in but then looked at the plug it wanna far off white!things I've changed since the original set up 50/160 pilot to a 55/160,124 main to a 118,B8 plug to B7.running a 24/24 with a DR180 kit on,any input fellas?cheers ovo.fyi/xvideos/ ovo.fyi/youporn/ ovo.fyi/xhamster/124 to 118 is to big a jump to start with . the leccy for ignition doesnt go near the reg box ,so it shouldnt be a factor . an also strobe/check ya timing to be sure its spot on .too retarded could of limited ya top mph to 50mph even with right jetting
|
|
|
Post by mijapxman on Dec 9, 2018 15:22:41 GMT
alpharitto, would be nice if you introduced yourself in the correct section 😉, may also be of interest, to check the date of the posts your answering ?😙
Mij☺
|
|