|
Post by doulsy on Dec 27, 2015 19:15:26 GMT
I dont have the tool to leave the 1mm gap for the bearing race that go's on crank, any idea's what i could use? Feeler gauge at each side maybe?
|
|
|
Post by henri on Dec 28, 2015 9:24:11 GMT
feeler gauge ,but bit fiddly , measure up ya steel rule/scrap metals/bean cans an make a tool maybe .H
|
|
|
Post by fredperrybruce on Dec 29, 2015 19:38:33 GMT
My local scooter mechanic told me not to bother with the 1mm gap,,, every crank race I've installed I've never bothered and had NO problems
|
|
|
Post by vespasco on Dec 30, 2015 2:22:07 GMT
I use a piece of 0.9mm thick offcut of copper(or steel, tin, etc) Leaving the 1mm gap makes getting it off a lot easier Piaggio describe having 16mm from the crank to the other edge of the bearing rather than 1mm gap. I guess to line the 2 x bearing races up so it wears evenly
|
|