|
|
Post by kidda on Dec 16, 2015 9:58:21 GMT
Would a T5 crank fit a PX125E?
|
|
|
|
Post by henri on Dec 16, 2015 15:49:07 GMT
yes an no, not straight in ,if thats what you mean , different stroke ,shorter on t5 ,52mm ,an also bigger 16mm little end so special piston needed . if prepared to do lots of barrel machining an lightened flywheel an different clutch you could make a high reving /short stroke px .or offset pin longer stroke t5 crank , but unless welding cases an fitting t5 barrel aswell no point really,an very very expensive .bout 350-400 euros for crank work alone .
for same or less money could get new crank (tameni) an save a bundle ,or go long stroke/full circle-reed induction if "speeds ya need" .
why you been offered a cheap t5 crank , if 2nd hand it will need checking before use in a t5 lump ,they can twist . H
|
|
|
|
Post by kidda on Dec 16, 2015 16:01:38 GMT
Nice one H,I saw one going cheap and thought might come in useful as a spare,cheers m8
|
|
