|
|
Post by baldmeister on Oct 30, 2015 19:33:00 GMT
hi all, after adjusting my vbb front brake today, it now seems to rub and seems to have a high point. any ideas how to fix it , and while im here whats the best way to get the hub centre off to put new shoes on??
cheers dj
|
|
|
|
Post by henri on Oct 30, 2015 20:24:11 GMT
back off the adjuster til it dont rub no more ,an then run on a straight road,grit ya teeth n hang on the front brake like ya life depends on it ,as it might some day , this will center the shoes an you can then re-adjust to get the right bite point .
i'm taking its still 4 stud closed rims , ok, its a rim/tyre off , undo screws n remove brake drum , some rubber hammer action might be involved, aswell as unadjusting brake , then remove speedo drive, an undo axle nut an drive axle n drum carrying plate out , an there ya go the shoes are accessible an its 20 minutes swearing n pinching fingers an there levered off n replaced , simples eh , then ya due a fag/tea/nervous breakdown break , with a job well done . H
|
|
|
|
Post by baldmeister on Oct 30, 2015 20:30:33 GMT
cheers henri, whatever would i do without you!!
if ever you are in frimley i will buy you a pint or two!!
dj
|
|
