bajaj electronic ignition kit

[maxifields]

Hi all, brought a Bajaj electronic ignition kit  (its the only one i could afford)There weren't any wiring instructions so I copied this www.google.co.uk/search?q=Conversion+Kit+BAJAJ+VESPA+WIRING&sa=X&rlz=1C1TEUA_enGB540GB540&espv=2&biw=780&bih=367&tbm=isch (the diagram from scootrus)but I'm not getting any spark at the plug though it appears I'm getting voltage out of the red and purple.I've disconnected any wiring going to the bike in case of the cut out switch so its just the cdi and the coil connected .If anyone has fitted one of these and has any ideas ,Many thanks in advance, 

[maxifields]

if going by the diagram I haven't got power coming out of the cdi have i got a faulty cdi?

[alanc]

hi max
I have the same set up and it works great however you'll probabley have to file the locating slots as they wont match up for the timing. as for the wiring...red=R violet=V gray=G the connectors at each side of the cdi stay empty plus run a wire from the bottom of the cdi to the coil the cutout wire connects to the violet on the cdi.