|
|
Post by kidda on May 19, 2015 5:05:49 GMT
Hiyya folks,I'm going strip the engine again and whilst I'm doing it I'm going replace the stator,I've seen some on eBay that are universal and quite cheap,any recommendations on this part and what I should be looking for?its a non battery scooter without electric start.cheers
|
|
|
|
Post by henri on May 19, 2015 8:07:04 GMT
if not a piaggio 1 i wouldnt touch anything not sold as lml genuine , the others are of very variable quality ,to say the least , from adequate to paperweight , mostly paperweight end of scale . H
|
|
|
|
Post by rab on May 19, 2015 11:28:07 GMT
I totaly agree with H on this one buy cheep at your own extra cost later or very possibly sooner
|
|
|
|
Post by henri on May 19, 2015 15:43:27 GMT
if you can solder , a beedspeed swiss 1 is a option , they are often needing re-soldering before use but base components are servicable , there just assembled by trained chimpanzees/child labour at the blind skool , cheap enuff tho, just against my principles to pay more than a fiver for a bit that needs fixin out the box , H
|
|
|
|
Post by kidda on May 19, 2015 22:28:34 GMT
ebay.to/1Ak637X I've seen this would this be ok for a 1984 px125e non battery scooter?
|
|
|
|
Post by henri on May 20, 2015 8:10:37 GMT
it would fit ,might need connectors changing on wires, an ive used that seller before ,but photo's not good quality an stator looks old , new old stock maybe but , an i always look for molten plastic blobs sealing the soldered joints, a sign of better quality,an cant see them on this one , if you pull up other listing piccys of better quality you'll see what i mean , the feedbacks not too bad tho, only 10 negatives recent , the guy who bought a seal kit listed as for "li/sx/tv/gp" an then moaned it didnt have the tv specific seal he wanted cant off known they changed seals designs often an no kit could cover all models/lumps ,made me chuckle , H
|
|
