Pink
2nd Class Ticket
Posts: 8
|
Post by Pink on Apr 9, 2015 11:30:26 GMT
H guys n girls. Hopefully Ive got this right! Does anyone know if and how the toolbox door on a PX comes off? Needs a little restoration but bread bin itself is fine. Cheers all. Pink
|
|
|
Post by henri on Apr 9, 2015 13:13:38 GMT
not sure on px 1's ,but on older ones the hinges are joined with pins ,an ya knock em out ,or if been done before there usually replaced with split pins , H
|
|
|
Post by moomoo on Apr 9, 2015 19:40:44 GMT
H guys n girls. Hopefully Ive got this right! Does anyone know if and how the toolbox door on a PX comes off? Needs a little restoration but bread bin itself is fine. Cheers all. Pink Hi Pink, Can I just ask you while you're doing that job....How does your toolbox fit up to the legshield? I mean is it a snug fit all way round where it seals to the legshield or is there any gaps? I'd like to know how anyone elses fits too if you wouldn't mine telling me...is it just mine that looks like the kids have fitted it?
|
|
Pink
2nd Class Ticket
Posts: 8
|
Post by Pink on Apr 9, 2015 19:52:41 GMT
Hi. It should fit pretty snug, not totally weather proof but there's shouldn't be any big gaps. Have you got the rubber seal fitted around the bread bin? ,If not that could be the problem. Also the nuts inside which hold the bread bin to the frame can be bloody fiddly so make sure its lined up straight and nice and tight. Hope that helps. Pink
|
|
|
Post by moomoo on Apr 9, 2015 20:44:24 GMT
Thanks Pink,
Dont know what's happened to mine!
|
|
|
Post by rab on Apr 10, 2015 6:25:18 GMT
Door fits with two pins at the bottom there hard to see but the ends are normaly bent over get a pair of pliers squash the pin straight then push out.Glove box will always sit snug with correct rubber on unless it's been damagede at some point warping the box
|
|