|
|
Post by fredperrybruce on Oct 27, 2014 20:21:35 GMT
Hi guys another thread ,,, My stator wiring is at best crap, my wire's that connect to the CDI are well and truly crusty/split and worn through as I learnt when I got a shock adjusting the mixture screw on the carb.  Anyway is it possible to replace the wiring on the stator with new?? My brothers a solderer by trade so instead of buying new would it pay to just get it rewired? Cheers |
|
|
|
Post by bryno on Oct 28, 2014 12:34:11 GMT
Yes, I rewire old stators its a no brainer if the wiring is getting a bit crispy! Automotive grade wire, in the right colours and some new tubing (normal or heat shrink), new spade ends or whatever you need, be good as new  |
|
|
|
Post by henri on Oct 28, 2014 19:43:23 GMT
as bryno says ,an as ya brother does it as a trade def the answer , give him the whole stator an ask for "like for like" an it shud be good , H
|
|
|
|
Post by vespasco on Oct 28, 2014 21:35:28 GMT
Yeh man! Get your brother to sort it for free Sorted! |
|
|
|
Post by sbwnik on Oct 28, 2014 23:40:20 GMT
Can he do me one? I've no time to do my spare up  |
|
|
|
Post by bryno on Oct 29, 2014 8:59:39 GMT
^ nice job in front of the TV over winter ;-)
|
|
|
|
Post by henri on Oct 29, 2014 14:32:27 GMT
just hunch over a hot soldering iron ,dont need to turn on the shed heater then , H
|
|
|
|
Post by fredperrybruce on Oct 30, 2014 18:13:37 GMT
Thanks guys, looks like somone has had a go already or the colour on the wires have faded I've got a brown and a yellow going into cdi!!. HENRI its that time of year now and the engines sitting in my front room , no electric in garage= engine being at home in the lounge.
|
|
