nicky
2nd Class Ticket
Posts: 15 
|
Post by nicky on Mar 16, 2014 9:14:02 GMT
Hi there. I am buying parts for my T5 but am not really clued up as to what parts I need to purchase for a T5 Ignition complete set. All the Vespa has at the moment is a hole where the ignition would usually go and there doesn't seem to be any wires to connect anything to. Currently anyone can come along, start the scoot and off they trot so need to get some security sorted and the ignition is the first thing I want to sort. I wondered if anyone could advise me on what I needed to buy for a 1982 T5 Vespa Douglas.
Any help appreciated, thanks
Nicky
|
|
mickymidas
High Number
2Ronnies sc , Nuneaton.....Promoting chuckleism to the masses
Posts: 232
|
Post by mickymidas on Mar 16, 2014 9:39:32 GMT
Not completely au fait with a T5 headset set up , but there should be 2 wires off the main loom within the headlight area ( usually 1 green,1 black ) which fit onto the onto the underside of the key switch . It sounds like the ignition has been wired for permanent ignition ( GS / Sprint type)so should have a kill switch... I would say that a complete ignition switch would be available from B/speed
|
|
nicky
2nd Class Ticket
Posts: 15
|
Post by nicky on Mar 16, 2014 9:50:26 GMT
I've looked on Beedspeed but I can't see anything obvious that tells me what I need. We was looking inside the headset yesterday to see where the wires would go, but nothing was really obvious as it seemed anywhere the wires could go, was already taken up by other wires. Another friend put a kill switch just above the petrol on/off switch because he couldn't figure out where the wires went from the ignition switch, it works as far as turning off the ignition, but not secure at all so need to figure out exactly what I need to buy and where the wires will go from the ignition switch.
|
|
