benny
2nd Class Ticket
Posts: 15
|
Post by benny on Aug 1, 2013 14:00:36 GMT
Looking for a disc lock to fit my px 125.? None seem to fit. Do they exist?
|
|
|
|
Post by sbwnik on Aug 1, 2013 17:30:23 GMT
yes, but you need one with a 6mm pin rather than the more common 8
|
|
|
|
Post by Robjack on Aug 1, 2013 19:36:34 GMT
There's also very little room between the disc and the wheel rim which means there aren't many about that will fit a PX. I couldn't find one anyway. Personally, I'd look for a grip lock which as well as locking the throttle, also applies the brake.
|
|
|
|
Post by sbwnik on Aug 1, 2013 19:51:41 GMT
I've got one that I've used regularly, but it's an awkward bugger to fit. Can't remember what brand it is though, I suspect 'cheap generic'!
TBH I've a cable lock that fits through the wheel, it's a lot easier to use and I can fasten the scooter to things with it.
|
|
vespasian
High Number
greater manchester
Posts: 235
|
Post by vespasian on Aug 2, 2013 15:41:30 GMT
just use a normal padlock ,,like i do  ) |
|
|
|
Post by sbwnik on Aug 2, 2013 21:24:26 GMT
I like that! I'd have never thought of it. Just a normal type, or can you get a round bodied one in there?
|
|
|
|
Post by Robjack on Aug 3, 2013 2:41:39 GMT
I doubt you'd get one of the round ones in there. I have used a normal padlock before, there's enough room to get the shank behind the disc as long as it's a short shank type. One of those brightly coloured bungee things that fasten to the brake lever to remind you it's there is a must though.
|
|
)