|
Post by super150 on May 29, 2012 11:27:16 GMT
Hi you lot- will a PX200 Engine fit in a 150 Super?
|
|
|
Post by sbwnik on May 29, 2012 20:58:38 GMT
Yes. The wiring may need bodging though.. and you'll be running a 10" rear and a 8" front. Which with the right paintwork would look cool as hell, but the brakes and front suspension would need improving. Although if it's going in the scooter with a P125 engine in, then the wiring should match up. Maybe.
|
|
|
Post by super150 on May 29, 2012 21:09:35 GMT
Thanks for that, have to give that one some thought.....
|
|
|
Post by bryno on Jun 14, 2012 20:25:25 GMT
physically the barrel and the carb box (autolube box bigger than the super one) may clash with your frame and need a bit of a mod to the body, but can be done.
you can actually use the supers rear hub on the P200 engine to give you 8" wheels at both ends, it will be the quickest thing away from the lights!
|
|
|
Post by sbwnik on Jun 15, 2012 3:04:30 GMT
If a P125 engine will drop straight in, then a 200 will too!
Blank off the autolube, change the carb box for a Super one if needed. Job done.
|
|
|
Post by bryno on Jun 15, 2012 7:54:23 GMT
Yes, the carb box is a better fit if its non autolube, you can get the autolube one in, but it catches the lip of the frame
IIRC the 200 barrel external diameter is bigger than the 125/150 and catches a bit on the frame down below the bellows, that may need some minor reshaping..
|
|