|
|
Post by damo1970 on Feb 14, 2012 8:52:55 GMT
As it says really,how easy is it to swap my pk50 front guard for a lambretta one,the reason being my 50xl seems to have an enormous looking front guard and horn cover.cheers in advance
|
|
|
|
Post by sbwnik on Feb 27, 2012 19:50:49 GMT
Easy enough. Angle grind the PK one off (or drop the forks, and remove it properly if it's in reasonable nick). Remove the horn cast. Line the Lambretta one up and work out where the mounting holes are. Drill the legshields and bolt the horn cover on. Mount the Lammy mudguard to the horn covr by the two holes underneath. Mark the mounting holes to the legshields. Drill them, bolt through, job done.
If you just want to fit the mudguard, measure up the depth and width of the horn cover, cut an appropriate sized hole in the top of the mudguard, offer up, mark bolt holes and drill etc etc.
Easy
|
|
